Swimming goggles Size L Soft black blue tinted blue

The colour of your goggles should be suited to your swimming location and its lighting. If you swim outdoors or in a pool with harsh lighting, prioritise goggles with smoked lenses to limit the glare. If, however, the pool is quite dark with low lighting, winter evenings for example, use clear lenses. The SOFT swimming goggles are available with two different lens tints (shaded and clear).

Complies with standard: Q/BT 4734 -2023, all our swimming goggles protect against harmful UVA and UVB rays when used normally, regardless of the lens tint. Looking directly at the sun is dangerous and can lead to irreversible eye damage.

Fogging is mainly due to the temperature difference between the body and the water. As the body is warmer than the practice environment, fogging occurs on the inside of the lenses through evaporation. As a result, every micro-drop of perspiration will stick to the inside of the goggles. In fact, it’s a bit of luck: all these drops will eventually combine to create a film of water through which you can see clearly.

The anti-fog treatment creates a microscopic film of water to allow clear vision, but its wear is accelerated by rubbing inside the lenses or over-exposure to chlorinated water. Taking care of the inside of your glasses is essential. Over time, it is normal for the anti-fog effect to diminish. Briefly soaking the glasses in water may help in the short term, but can also accelerate the wear of the treatment. Our anti-fog marker reactivates the treatment!

Available in size S (children and small heads) and size L (large heads). The watertightness of the glasses depends on the fit of the silicone skirts to the shape of the face. Before buying your glasses, we recommend that you carry out the \"suction cup\" test without the elastic band. Position the goggles over your eyes; if they hold on by themselves with a little suction, they will be watertight once in the water. This test can also identify areas of discomfort or annoyance on the face.

These swimming goggles fit the morphology of your face without needing to be overly adjusted. Goggles that are too tight can cause discomfort, leave marks and even create water inlet holes. It is not necessary to press against the lenses with your hands, a light suction effect is usually enough for swimming sessions without water inlet holes. The straps ideally should rest 2-3 cm above your ears. This position will optimise the grip and comfort of the goggles.