Repair patch kit for repairing your inner tubes.
How to use a repair patch on an inner tube
1/ Locate the hole on the inner tube.
2/ Rub the surface where the patch will be applied using the sandpaper.
3/ Degrease, clean and dry the surface.
4/ Spread the glue evenly around the hole.
5/ Wait around 5 minutes until the glue turns dull.
6/ Place the patch over the centre of the hole (without touching the glue and grippy surface of the patch with your fingers) and press hard for at least 1 minute.
Tip from the pros
Check that no objects are lodged in the tyre before putting the inner tube back in place.
For greater effectiveness, adapt the size and shape of the patch to the puncture.
Product details:
4 round patches, 19 mm in diameter
2 round patches, 25 mm in diameter
2 rectangular patches, 18 mm x 28 mm
1 scraper
The tube of solvent-based adhesive required to apply these patches and repair your punctures (Ref: (8545180) is sold separately.
Storage:
Patches:
Optimal lifespan: 5 years at room temperature (16-22°C, 30-70% humidity), out of direct sunlight, in its packaging.
Minimum temperature for repairs: +10°C
Temperature for use: -40°C to +65°C
Eco-design:
As we're committed to an eco-design policy, we've modified this product's packaging to include 30% recycled plastic, which significantly reduces the product's environmental impact.
This refill pack of bicycle inner tube repair patches must be used with a solvent-based adhesive. Repair your punctures in a reliable way so they last.
Compatibility
100% effective on all inner tubes (except TPU).
Compact design
Compact design fits in a pocket so you can carry it anywhere.
Repair patch kit for repairing your inner tubes.
Reviews